Accessories

LiveStar Mini Planetarium

With the LiveStar? Mini Planetarium from iOptron you and your family can experience the excitement of going to a planetarium right from inside your own home! The LiveStar? Mini Planetarium projects the night sky right onto the ceiling and walls allowing you to explore the stars indoors. You?ll be able to see the stars and constellations ? even see the Milky Way. Plus, the planetarium rotates to mimic the motion of the night sky! Simple to set up and use ? it provides a fun way to learn about astronomy.


iE1300 Electronic Eyepiece

With the iOptron iE1300 Electronic Eyepiece you can experience astro-video and astrophotography for yourself! The iOptron Electronic Eyepiece allows you to view real-time images from your telescope on a computer screen. The iOptron iE Electronic Eyepiece transmits live video images of the Moon, Sun, planets and terrestrial objects through a USB cable to your computer. Images can be recorded for later playback or frame imaging.

Works with all our SmartStar® series and Astroboy® series telescopes


2 Pack of Red LED MicroLights

These quality MicroLights throw the perfect red beam for astronomy use, plenty of light to read by but not so bright that it will affect your dark adapted vision. Can be used with the pushbutton for momentary light or slide the switch and they will stay lit without holding down the button.
Twin pack. Batteries Included (and replaceable).


Large, easy to read astronomer's Compass

This quality compass measures a full 1 3/4" across. It features a large clear dial for easy viewing. It is permanently sealed and oil damped for quick stable readings. There's a place for one of these in any astronomer's case.


Telescope and spotting scope vibration is caused by windy conditions, an unsteady mount or tripod or even an accidental bump to the instrument, and results in reduced image quality.

 

Celestron’s set of three Vibration Suppression Pads will reduce vibration time by almost 100% and decrease vibration amplitude. The pads fit between the bottom of the tripod legs and the ground, a simple and functional solution to the problem of image disturbance.

 

They work on any surface: grass, dirt, concrete, asphalt, wood, etc., for both telescopes and spotting scopes.


Binocular Tripod Adapter

This adapter allows you to mount your binocular (porro or roof) to a tripod for added stability and convenience


Flashlight, Night Vision

Celestron’s premium model for astronomy, using two red LEDs to preserve night vision better than red filters or other devices. Brightness is adjustable. Operates on a single 9 volt battery (included).


Visual Back 1.25

This accessory is used to adapt the threads on all Schmidt-Cassegrain models for use with 1.25" accessory items. This includes diagonals, straight through viewing with eyepieces, etc.

 

This item comes standard with all Celestron 5", 6", 8", 9.25" and 11" Schmidt-Cassegrains.


Collimation Eyepiece 1.25 in

The Celestron Cheshire Collimation Eyepiece is ideal for precise collimation of Newtonians and helpful for aligning Schmidt-Cassegrains. This special eyepiece fits into 1¼" focusers or diagonals.

 

Alignment is easy using the small opening on one end and thin cross hairs at the other end. The collimation eyepiece is more accurate than the simple Collimation Tool.


Micro Guide Eyepiece 1.25 in - 12.5mm

This multi-function guiding eyepiece features a laser-etched reticle with a built-in battery illuminator. The eyepiece is a multicoated 12.5mm Abbe (4-element) Orthoscopic. Usage possibilities include: direct guiding on stars outside the center of the field of view; greatly improved off-axis guiding to capture much fainter, sharply focused guide stars without reducing limiting magnitude; and measuring position angles and separation of double stars.

 

The Micro Guide Eyepiece is totally free of internal reflections and offers sufficient eye relief for the reticle to be viewed easily, even with eyeglasses. Its finely etched micrometer scale has gradations 50 microns apart and 15 microns wide. Included are: the eyepiece, built-in cordless illuminator with adjustable brightness control, batteries and instructions. The apparent field of view is 42°.

 


Zoom Eyepiece 1.24 in - 8-24mm pass

Super-premium fully multi-coated 1.25" zoom eyepiece has a focal length of 8-24mm. Allows for expanded magnification options.

 

Focal length of 8mm to 24mm

Field of view: 40 - 60 degrees

Eye relief: 15 - 18mm

Fully Multicoated

 


Omni 1.25 in - 2x

The Omni Barlow is a high quality 2x Barlow lens that doubles the magnification of all 1.25" eyepieces. This economically priced Barlow has great features like, low profile, 2-element fully-multicoated optical design and blacked lens edges.


Omni Series 1.25 in available from 4mm to 40 mm

Threaded barrels accept 1-1/4" Celestron thread-in filters. The 4 mm high power Omni eyepiece is a 4 -element premium symmetrical Plössl optical design. Features include blackened lens edges to minimize internal reflection and maximize contrast, multi-layer coating group on each lens surface to maximize light transmission and contrast, and each Omni goes through a two-step anodizing process to prevent reflection from the top eyepiece barrel, unlike most other manufactures who use reflective surfaces.


X-Cel Series 1.25 in available from 2.3mm To 25mm

The 2.3mm high power X-Cel eyepiece is a 6-element fully multi-coated optical design, the X-Cel utilizes extra low dispersion (ED) glass on its most highly curved surfaces, to minimize chromatic aberration that can hinder sharp planetary views. With a wide 55° apparent field of view, and a large 25mm clear aperture the X-Cel is one of the most comfortable eyepieces to use.

 

Every X-Cel eyepiece is parfocal with each other, meaning little or no focusing is needed when changing from low to high power. The X-Cel comes with soft rubber eyecups and a durable plastic case. In addition, if you are an eyeglass wearer, you will enjoy the 20mm eye relief available on each of the X-Cel focal lengths.

 

Threaded barrels accept 1-1/4" Celestron thread-in filters.


Moon Filter - 1.25 in

Celestron?s Moon Filter is an economical eyepiece filter for reducing the brightness of the moon and improving contrast, so greater detail can be observed on the lunar surface. The clear aperture is 21mm and the transmission is about 18%.


RED DOT FINDER (SLIDING)

The Red Dot Finder is a zero magnification pointing tool that uses a coated glass window to superimpose the image of a small red dot onto the night sky, showing where the telescope is pointed. It is equipped with a variable brightness control, azimuth adjustment control, and altitude adjustment control.

 

Recommend for: OTHERS QUICK SETU


The bright emerald green beam is visible in the night sky!

The bright emerald green beam is easily visible in the night sky making it perfect for pointing out stars, constellations and planets. Uses 2" "AAA" Batteries (included).

 

Note: You should NEVER aim a laser at any person, animal or aircraft.

 

Telescope adapters


COLLIMATOR FOR NEWTONIAN

The Sky-Watcher Collimation Eyepiece is ideal for precise collimation of Newtonians and refractors with an adjustable lenscells. This special eyepiece fits into 1¼" focusers or diagonals. Alignment is easy using the small opening on one end and thin crosshairs at the other end.

 


COLLIMATOR FOR REFRACTOR

The Sky-Watcher Collimation Eyepiece is ideal for precise collimation of Newtonians and refractors with an adjustable lenscells. This special eyepiece fits into 1¼" focusers or diagonals. Alignment is easy using the small opening on one end and thin crosshairs at the other end.

 


Oxygen III Narrowband Filter - 1.25 in

The 1-1/4" OIII narrowband filter isolates just the two doubly-ionized oxygen lines (496 and 501nm lines) emitted by planetary and emission nebulae, while blocking the rest of the overall spectrum of light. The result is extreme contrast between the black sky background and the faint photons of OIII light needed for detailed views of the Veil, Ring, Dumbbell, Crescent and Orion nebulae, among other objects.

 

Each filter has an ultra hard, vacuum-deposited coating carefully designed to block all of the visual spectrum ranging from 400 to 700 nm This eliminates the un-natural colored halos surrounding bright stars common with O III filters of less sophisticated coating technology.


Lens Shade

A dual Velcro stripavailablle in different size


Motor Drive for EQ AstroMasters and PowerSeekers

Compatible with all german equatorial mount


Laser Finderscope Kit

The Telescope Mounted Laser Finderscope Kit includes:

Green Laser Finder (with two alignment screws and one mounting screw)

Mounting Bracket With Dovetail 

Mounting Bracket With Holes (SCT)

Long life CR123A battery 

5mW green laser

Two Mounting brackets; one for dovetail mounts, one for SCT telescope

Quick release dovetail attachment allows dual use as a pointing device for your telescope or as a hand held star pointer.

X-Y alignment screws for quick and accurate alignment

 

 




We can get any Telescope attachment for any kind of camera listed including for Dsrl and point and shoot cameras. Ask us and we will order it for you

Camera Adapter
FAQ
Camera Adapters

Telescope Adapters
by Camera Brand

Canon
Nikon
Sony
Olympus

2" UltraWide Prime Focus Telescope Adapters
Canon EOS/Rebel
Canon F/A/T Series
Minolta Maxxum
Nikon
Pentax "K"
Pentax "S"
Sony Alpha
Olympus 4/3
Olympus OM

1.25" SLR/DSLR Kitsfor Telescopes
Prime Focus Kits
Eyepiece Projection Kits
Variable Projection Kits
Premium Projection Kits
ETX/C90 Adapter Kits

Point & Shoot type Digital Camera Adapters for Telescopes
Digi-Kits - quick & easy!Photographic Eyepiece

Other Adapters
Master Adapter SetTelescope Spotting ScopeMicroscope WebcamUniversal Attachment KitsStep Rings

"T" Mount Parts
T-Mounts / T-RingsMaxView "T" Eyepiece Step Rings

"C" Mount Parts
C Mount Adapters

Extension Tubes
1.25" Extensions2" Extensions

Hybrid Size Adapters
Hybrid .96"- 1.25"
Hybrid 1.25"- .96"
Hybrid 1.25"- 2"
Hybrid 2"- 1.25"

Microscope Adapters
Microscope
Adapters

Rear Port Adapters
(Visual Backs)

ETX/C90/C130/N4LAR for ETX/C902" for SCT

ETX & C90
ETX & C90 Adapters